Search results for: 'value 2,0'
Did you mean valve 20?
-
Solar check valve RSS DN 20with brass valve plate,
all installation positions possible,
opening pressure 200 mm wc,
¾" internal thread,
length = 50 mm
1211: can be opened, up to 150 °C
12111: without possibility for manual opening, up to 220 °C Learn MoreOur offer is exclusively aimed at corporate clients.
-
2-way zone valve DN 20for connecting and disconnecting single storage tanks,
DN 20, ¾" int. thread,
setting time for 90°: 30 sec. Learn MoreOur offer is exclusively aimed at corporate clients.
-
3-way zone valve DN 20for switching between single storage tanks,
DN 20, ¾" int. thread,
setting time for 90°: 18 sec.,
Kvs value = 7 Learn MoreOur offer is exclusively aimed at corporate clients.
-
3-way zone valveCan be used in solar and heating installations, to switch between different zones or to connect and disconnect different parts of the system.
The actuator is equipped with a relay which is actuated by a 2-point signal, if need be it can also be manually operated.
The 3-way zone valve can be operated in both directions. Learn MoreOur offer is exclusively aimed at corporate clients.
-
2-way zone valveCan be used in solar and heating installations as a zone valve, which means that single parts of the system can be connected or disconnected.
The actuator is equipped with a relay which is actuated by a 2-point signal, if need be it can also be manually operated.
The 2-way zone valve can be operated in both directions. Learn MoreOur offer is exclusively aimed at corporate clients.
-
Extension set for 3-way mixing valve DN 20 / DN 25Before: mixing valve K33 (with bypass on the back), DN 20/DN 25
After: mixing valve K32 DN 20/DN 25, flow on the right + flow on the left Learn MoreOur offer is exclusively aimed at corporate clients.
-
Return flow temperature maintenance with thermal control valve (45 °C) - DN 20 (¾")Return flow temperature maintenance - DN 20 (¾")
with thermal control valve (45 °C)
Opening temperature: 45 °C
Field of application: for heating systems with return flow temperature maintenance
for solid fuel boilers, wood-fired and stove heating systems
Learn MoreOur offer is exclusively aimed at corporate clients.
-
Return flow temperature maintenance with thermal control valve (60 °C) - DN 20 (¾")Return flow temperature maintenance - DN 20 (¾")
with thermal control valve
Opening temperature: 60 °C
Field of application: for heating systems with return flow temperature maintenance
for solid fuel boilers, wood-fired and stove heating systems
Learn MoreOur offer is exclusively aimed at corporate clients.
-
Thermo ball valve (TK)1 x PAW flange (without nut)
1 x internal thread
Diameter thermometer = 50 mm
Dial thermometer with blue scale in the handle, handle can be pulled off with thermometer
For DN 25-32 additionally:
1 x sleeve (on the side) ½", for overflow valve
1 x self-sealing blind plug ½"
Learn MoreOur offer is exclusively aimed at corporate clients.
