€9.00 - €99,999.00
€99,999.00
€9.00

33 Produkte

33 Produkte

33 Produkte

  1. System separation DN 25 (1") for HeatBloC®s
    System separation DN 25 (1") for HeatBloC®s
    Function: Separation of the boiler circuit and the consumer circuit

    Field of application:
    for radiant panel heating systems with plastic pipes for the protection of new boilers in older heating installations
    Recommended application range:
    Min. residual head: 1.5 m
    Temperature difference primary: 60-50 °C
    Temperature difference secondary: 35-45 °C

    Range of performance:
    depending on the pump of the heating circuit used and the amount of plates of the heat exchanger
    16 plates: up to 20 kW, 10 K up to 1720 l/h
    30 plates: up to 23 kW, 10 K up to 2010 l/h
    40 plates: up to 25 kW, 10 K up to 2150 l/h

    Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  2. Immersion sleeves ½" ext. thread
    Immersion sleeves ½" ext. thread
    for the installation of the temperature sensors (d = 6 mm) in the storage tank, in the collector and the hydraulic separator.

    Attention: suitable for ball valves until 2016!

    566001: self-sealing with, o-ring, polished brass, for sensor, T = 30 mm
    566002: standard, chromed brass, for sensor, T = 60 mm
    5660021: standard, chromed brass, with valve extension (25 mm), for sensor, T = 60 mm
    566003: standard, chromed copper, for sensor, T = 100 mm
    566004: standard, chromed copper, for sensor, T = 150 mm

    Learn More

    Solex|SolarBloC®

    Solar

    thermal

    systems

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  3. Contact thermostat 20-60 °C
    Contact thermostat 20-60 °C
    Contact thermostat for limiting the flow temperature, adjustable from 20 - 60 °C



    Learn More

    Valves/Fittings

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  4. Wandmontagesatz für Stockschrauben

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  5. Wall bracket DN 25 - DN 32
    Wall bracket DN 25 - DN 32
    Galvanised mounting bracket for wall assembly of HeatBloC®s.
    Mount HeatBloC®s on mounting bracket for an easy assembly.


    Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  6. Sealing for nut
    Sealing for nut
    asbestos-free
    outside diameter: 30 mm
    inside diameter: 21 mm
    height: 2 mm



    Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  7. Sperrventil DN 25
    Sperrventil DN 25
    Zum Einsetzen in das Gehäuse des PAW-Mischers.
    Verhindert Fehlzirkulationen, z. B. bei mehreren Mischern auf einem Verteiler.
    Das Sperrventil wird einfach in das Mischergehäuse eingesetzt.
    Für HeatBloC® K38 - DN 25 Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  8. Non-return valve for the mixing valve return
    Non-return valve for the mixing valve return
    To be inserted into the PAW mixing valve.
    Prevents unwanted circulation for example when various mixing valves are connected to one distribution manifold.
    The shutoff valve can be simply inserted into the mixing valve.

    Not for HeatBloC® K38 DN 25.

    Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  9. Extension set for low-loss header DN 25
    Extension set for low-loss header DN 25
    For a subsequent conversion into a distribution manifold with integrated hydraulic separator (low-loss header).
    Range of application up to 1600 l/h, max. up to a 3-fold distribution manifold MV3.
    Consisting of two distance rings for a resistance-free connection of flow and return chamber, incl. screws and o-rings. Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  10. Fitting for heat flowmeter DN 25 for unmixed HeatBloC®s
    Fitting for heat flowmeter DN 25 for unmixed HeatBloC®s
    - for unmixed HeatBloC®s DN 25
    - for heat flowmeters with the dimensions ¾" x 110 mm and 1" x 130 mm

    Scope of delivery:
    - Pump ball valve with check valve, can be opened (200 mm wc)
    - Screw-in fittings
    - Union nuts
    - Adapter pipe
    - Flange fitting
    - Reducers for immersion sensor (¼" ext. thread, self-sealing x M10 x 1" int. thread and ¼" ext. thread, self-sealing x M12 x 1.5" ext. thread)
    - Seals

    Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

No further products