Accessories SolarBloC® DN 25
-
Immersion sleeves ½" ext. threadfor the installation of the temperature sensors (d = 6 mm) in the storage tank, in the collector and the hydraulic separator.
Attention: suitable for ball valves until 2016!
566001: self-sealing with, o-ring, polished brass, for sensor, T = 30 mm
566002: standard, chromed brass, for sensor, T = 60 mm
5660021: standard, chromed brass, with valve extension (25 mm), for sensor, T = 60 mm
566003: standard, chromed copper, for sensor, T = 100 mm
566004: standard, chromed copper, for sensor, T = 150 mm
Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.
-
Cutting-ring compression fitting DN 25 (1")1" external thread, self-sealing with o-ring, with support sleeve, suitable for soft copper pipes.
For temperatures up to 150 °C. Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.
-
Hand filling pump with fill and drain valve½" external thread, 15 mm hose connection, attainable pressure up to approx. 4 bars, length 225 mm
Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.
-
Hand filling pump without fill and drain valve½" external thread, 15 mm hose connection, attainable pressure up to approx. 4 bars, length 225 mm
Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.
-
Solex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.
-
Stainless-steel corrugated hose SolarflexIdeal for the roof part leading to the collector. Learn More
Solex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.
-
Flush and fill unit DN 25consisting of: Brass ball valve internal thread 1", with red butterfly handle, with 2 outlets ½" before and after the ball, 2 self-sealing fill and drain valves with hose connector 15 mm
56431, 56441, 56451, 56461: additionally with 2 cutting-ring compression fittings with support sleeve, premounted
Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.
-
Flush and drain unit DN 25Counter T-piece with self-sealing fill and drain valve.For extending the solar station with a flush and drain connection or for installation at the lowest point (drain unit). Learn More
Solex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.
-
Hand refractometerThe hand refractometer measures the anti-freeze safety of water-propylene glycol and water-ethylene glycol mixtures in solar thermal installations.It can also be used to determine the density of water-battery acid mixtures.Only one or two drops of the fluid are sufficient.
Measuring ranges:
propylene glycol: 0 - 50 °C
ethylene glycol: 0 - 50 °C battery
acid: 1.10 - 1.40 g/cm³
Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.
-
Solar pressure gaugewith automatic isolation,
solar version up to 130 °C,
measuring range: 0-6 bars
diameter: d = 50 mm
Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
Our offer is exclusively aimed at corporate clients.