• Best quality
  • Quick assembly
  • Longevity





SolexMega HZ up to 200 m²

Field of application: for charging buffer storage tanks
Application range: up to 200 m² collector surface
with heat quantity measurement according to the BAFA promotion directive for solar thermal systems
The CE-conformity of the installation has been certified according to DIN EN 60335.

Prices are only visible for registered users.

Our offer is exclusively aimed at corporate clients.

Operating data
Max. operating pressure primary: 6 bar
Max. operating pressure secondary: 6 bar
Low-flow: 0.25 l/min per m² of collector surface
High-flow: 0.5 l/min per m² of collector surface
Max. operating temperature primary: 120 °C
Max. operating temperature secondary: 95 °C
Controller: SC5.14
Check valves: primary: 2 x 250 mm wc / secondary: 2 x 250 mm wc
Pressure gauge: 0-6 bars, resistant to high temperatures
Shut-off valves: Ball valves
Sensors: 2 x Pt1000 (integrated)
Heat exchanger: XB37M-1, 2x 50 plates
Safety valve: primary: 6 bars / secondary: 6 bars
FlowRotor: 5-100 l/min
Airstop: yes
Height: 1654 mm
Width: 710 mm
Nominal diameter: DN 32 (1¼")
Depth: 920 mm
Installation length: 1205 mm
Centre distance: 158 mm
Connection primary: 1½" int. thread
Connection secondary: 1½" int. thread
Valves and fittings: Brass
Gaskets: EPDM / AFM34
Insulation: EPP
Piping: Edelstahl
Check valves: Brass
Heat exchanger: Solder: copper,Plates + connecting pieces: stainless steel
Design data
Operating mode LowFlow: 15 l/(m²xh)
Operating mode HighFlow: 25 l/(m²xh)
Collector surface LowFlow: 200 m²
Collector surface HighFlow: 160 m²
Output LowFlow: 100 kW
Temperature difference LowFlow: 33 K
Temperature difference HighFlow: 12 K
Boundary conditions: Irradiation = 800 W/m²; efficiency ᵑ0.05 = 65%
The compact and completely premounted solar transfer station is completely insulated and equipped with a generously dimensioned stainless steel plate heat exchanger and with a preset and prewired controller.For a simple and quick installation as well as a safe commissioning.

All connections 1½" internal thread

Floor-standing station, premounted in steel rack,
simple and quick installation and connection

All fluid-carrying parts made of brass or stainless steel, fully assembled - self-sealing or flat gaskets

Full port ball valves
primary and secondary side, with large levers for easy handling, visible closing position

Check valves in the solar and secondary circuit in the flow and return,, can be opened, 200 mm wc, especially for solar systems, prevent unwanted circulation

Airstop in the flow line
for permanent deaeration of the solar fluid

See page

With high-efficiency pumps by Grundfos, premounted and prewired, adapted to the performance of the transfer station, pumps can be isolated completely, no draining during servicing

Flush and fill unit integrated
two fill and drain valves permit filling and flushing the primary circuit, secondary circuit with pressure relief valve at the highest point of the heat exchanger

FlowRotor, flow meter for speed control of the secondary pump, depending on the performance and heat quantity balancing (secondary)

Solar safety group
Solar pressure relief valve 6 bars, pressure gauge resistant to high temperatures 0-6 bars with valve, flat sealing connection for a diaphragm expansion tank, secondary side with pressure relief valve, 6 bars

Compact design insulation with optimised function
made of durable elastic EPP, 100 % insulated valves and fittings - excellent ventilation and cooling of the pumps, minimal heat losses

High-efficiency plate heat exchanger
generously dimensioned, for transmitting high performances with low temperature differences, completely integrated into the insulation

Do you have any questions?

If you have any questions about our products and services, please contact us via telephone or via e-mail. You can also use the contact form to submit your request.