- Best quality
- Quick assembly
- Longevity
Solex|SolarBloC®
Solar
thermal
systems
SolexMini TW up to 36 m²
Field of application: for charging buffer storage tanks
Application range: up to 36 m² collector surface
with heat quantity measurement according to the BAFA promotion directive for solar thermal systems
The CE-conformity of the installation has been certified according to DIN EN 60335.
Application range: up to 36 m² collector surface
with heat quantity measurement according to the BAFA promotion directive for solar thermal systems
The CE-conformity of the installation has been certified according to DIN EN 60335.
| Number of check valves | 2 |
|---|
Operating data
Max. operating pressure primary:
6 bar
Max. operating pressure secondary:
10 bar
Max. operating temperature primary:
120 °C
Max. operating temperature secondary:
95 °C
Equipment
Controller:
SC5.14
Check valves:
primary: 2 x 200 mm wc
Pressure gauge:
0-6 bar, resistant to high temperatures
Shut-off valves:
Ball valves and piston valves
Sensors:
3 x Pt1000 (integrated) / 2 x Pt1000 (enclosed)
Safety valve:
primary: 6 bar / secondary: 10 bar
FlowRotor:
0.5-15 l/min
Airstop:
yes
Dimensions
Height:
681 mm
Width:
417 mm
Nominal diameter:
DN 15 (½")
Depth:
249 mm
Installation length:
686 mm
Connection primary:
¾" int. thread
Connection secondary:
¾" int. thread
Materials
Valves and fittings:
Brass
Gaskets:
EPDM / AFM34
Insulation:
EPP
Piping:
Stainless steel
Check valves:
Brass
Design data
Operating mode LowFlow:
25 l/(m²xh)
Operating mode HighFlow:
40 l/(m²xh)
Collector surface LowFlow:
36 m²
Collector surface HighFlow:
30 m²
Output LowFlow:
18 kW
Temperature difference LowFlow:
20 K
Temperature difference HighFlow:
12 K
Boundary conditions:
Irradiation = 800 W/m²; efficiency ᵑ0.05 = 65%
The compact and completely premounted solar transfer station is completely insulated and equipped with a generously dimensioned stainless steel plate heat exchanger and with a preset and prewired controller.For a simple and quick installation as well as a safe commissioning.
All connections ¾" internal thread
Premounted on steel wall bracket
can be easily mounted to the wall
All fluid-carrying parts made of brass or stainless steel, fully assembled - self-sealing or flat gaskets
Solar circuit with ball valves
key-actuated, easy handling, visible closing position, with integrated full metal thermometer 0-160 °C, can be pulled off, with immersion sleeve integrated in the ball valve, secondary circuit with piston valves
Check valve in the solar and secondary circuit, can be opened, 200 mm wc, especially for solar systems, prevent unwanted circulation
Airstop in the flow line
for permanent deaeration of the solar fluid
With high-efficiency pumps by Grundfos, premounted and prewired, adapted to the performance of the transfer station, pumps can be isolated completely, no draining during servicing
Flush and fill unit integrated
two fill and drain valves permit filling and flushing the primary circuit, secondary circuit with pressure relief valve at the highest point of the heat exchanger
FlowRotor, flow meter for speed control of the secondary pump, depending on the performance and heat quantity balancing (secondary)
Solar safety group
Solar pressure relief valve 6 bars, pressure gauge resistant to high temperatures 0-6 bars with valve, flat sealing connection for a diaphragm expansion tank, secondary side with pressure relief valve, 6 bars
Compact design insulation with optimised function
made of durable elastic EPP, 100 % insulated valves and fittings - excellent ventilation and cooling of the pumps, minimal heat losses
High-efficiency plate heat exchanger
generously dimensioned, for transmitting high performances with low temperature differences, completely integrated into the insulation
All connections ¾" internal thread
Premounted on steel wall bracket
can be easily mounted to the wall
All fluid-carrying parts made of brass or stainless steel, fully assembled - self-sealing or flat gaskets
Solar circuit with ball valves
key-actuated, easy handling, visible closing position, with integrated full metal thermometer 0-160 °C, can be pulled off, with immersion sleeve integrated in the ball valve, secondary circuit with piston valves
Check valve in the solar and secondary circuit, can be opened, 200 mm wc, especially for solar systems, prevent unwanted circulation
Airstop in the flow line
for permanent deaeration of the solar fluid
With high-efficiency pumps by Grundfos, premounted and prewired, adapted to the performance of the transfer station, pumps can be isolated completely, no draining during servicing
Flush and fill unit integrated
two fill and drain valves permit filling and flushing the primary circuit, secondary circuit with pressure relief valve at the highest point of the heat exchanger
FlowRotor, flow meter for speed control of the secondary pump, depending on the performance and heat quantity balancing (secondary)
Solar safety group
Solar pressure relief valve 6 bars, pressure gauge resistant to high temperatures 0-6 bars with valve, flat sealing connection for a diaphragm expansion tank, secondary side with pressure relief valve, 6 bars
Compact design insulation with optimised function
made of durable elastic EPP, 100 % insulated valves and fittings - excellent ventilation and cooling of the pumps, minimal heat losses
High-efficiency plate heat exchanger
generously dimensioned, for transmitting high performances with low temperature differences, completely integrated into the insulation
Do you have any questions?
