Accessories
-
Floor bracketComponents: 2 floor brackets (galvanized steel), 4 wall plugs, 4 screws, 2 screws for fixing the distribution manifold onto the floor brackets
Height = adjustable 1050 - 1080 mm, for shortening simply cut off
Learn MoreHeatBloC®
Heating
technology
Our offer is exclusively aimed at corporate clients.
-
System separation DN 25 (1") for HeatBloC®sFunction:
Separation of the boiler circuit and the consumer circuit
Field of application:
for radiant panel heating systems with plastic pipes for the protection of new boilers in older heating installations
Recommended application range:
Min. residual head: 1.5 m
Temperature difference primary: 60-50 °C
Temperature difference secondary: 35-45 °C
Range of performance:
depending on the pump of the heating circuit used and the amount of plates of the heat exchanger
16 plates: up to 20 kW, 10 K up to 1720 l/h
30 plates: up to 23 kW, 10 K up to 2010 l/h
40 plates: up to 25 kW, 10 K up to 2150 l/h Learn MoreHeatBloC®
Heating
technology
Our offer is exclusively aimed at corporate clients.
-
Wall bracket DN 20Components: 2 wall bracket sets, mounting equipment Possible wall distance: 70-100 mm, distance: 15 mm
For 5-fold modular distribution manifolds, we recommend to use two wall bracket sets.
Learn MoreHeatBloC®
Heating
technology
Our offer is exclusively aimed at corporate clients.
-
Safety set DN 20for distribution manifolds DN 20,
with self-sealing counter T-piece ¾" x ½",
outlet ¾" with cap for expansion tank,
pressure relief valve ½" x ¾", 3 bars, up to 50 kW,
pressure gauge 0-4 bars Learn MoreHeatBloC®
Heating
technology
Our offer is exclusively aimed at corporate clients.
-
PAW actuator SR2easy assembly and disassembly thanks to the smart PAW snap-in mechanism,
with 1.5 m cable and mounting set for snap-in assembly on the PAW mixing valve,
for weather-compensated control,
due to the removable scale it is suited for the flow on the right or left side
change-over switch for manual / automatic operation
Learn MoreValves/Fittings
Our offer is exclusively aimed at corporate clients.
-
Immersion sleeves ½" ext. threadfor the installation of the temperature sensors (d = 6 mm) in the storage tank, in the collector and the hydraulic separator.
Attention: suitable for ball valves until 2016!
566001: self-sealing with, o-ring, polished brass, for sensor, T = 30 mm
566002: standard, chromed brass, for sensor, T = 60 mm
5660021: standard, chromed brass, with valve extension (25 mm), for sensor, T = 60 mm
566003: standard, chromed copper, for sensor, T = 100 mm
566004: standard, chromed copper, for sensor, T = 150 mm Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
-
Overflow set for HeatBloC®s DN 20with self-sealing counter-T-pieces and elbow gland, adjustment range 1-6 m wc, suitable for HeatBloC®
Learn MoreHeatBloC®
Heating
technology
Our offer is exclusively aimed at corporate clients.
-
Conversion kit for changing the flowThe conversion kit for changing the flow line is mandatory for mixing valves K33 with bypass at the front.
Learn MoreHeatBloC®
Heating
technology
Our offer is exclusively aimed at corporate clients.
